Bỏ qua nội dung chính

Làm cách nào để nhận được lời nhắc hoặc xác nhận trước khi gửi email trong Outlook?

Tác giả: Siluvia Sửa đổi lần cuối: 2020-07-08

Trong nhiều lần, bạn đã gửi một email và nhận ra rằng bạn bỏ lỡ một cái gì đó quan trọng, hoặc một cái gì đó sai xuất hiện trong email một vài giây sau đó. Làm cách nào để tránh gửi email xấu hổ trong Outlook? Trên thực tế, bạn có thể xác nhận lại việc gửi email sau khi nhấn nút Gửi trong Outlook. Phương pháp trong bài viết này có thể giúp bạn chỉ ra vấn đề.

Nhận lời nhắc hoặc xác nhận trước khi gửi email có mã VBA


Nhận lời nhắc hoặc xác nhận trước khi gửi email có mã VBA

Mã VBA sau có thể giúp bạn xác nhận lại việc gửi email sau khi nhấn nút Gửi trong Outlook. Hãy làm như sau.

1. Nhấn nút Khác + F11 phím để mở Microsoft Visual Basic cho các ứng dụng cửa sổ.

2. bên trong Microsoft Visual Basic cho các ứng dụng cửa sổ, vui lòng nhấp đúp để mở ĐâyOutlookSession cửa sổ mã, và sau đó sao chép mã VBA bên dưới vào cửa sổ mã.

Mã VBA: Nhận xác nhận trước khi gửi email trong Outlook

Private Sub Application_ItemSend(ByVal Item As Object, Cancel As Boolean)
Dim xPrompt As String
Dim xOkOrCancel As Integer
On Error Resume Next
xPrompt = "Do you want to continue sending the email?"
xOkOrCancel = MsgBox(xPrompt, vbOKCancel)
If xOkOrCancel <> vbOK Then
    Cancel = True
End If
End Sub

3. Nhấn nút Khác + Q chìa khóa để đóng Microsoft Visual Basic cho các ứng dụng cửa sổ.

Kể từ bây giờ, khi bạn nhấn Gửi để gửi email trong Outlook, một hộp thoại xác nhận sẽ bật lên như ảnh chụp màn hình bên dưới. Nhấp chuột OK để gửi email này, hãy nhấp vào Hủy bỏ để tiếp tục soạn email.

Công cụ năng suất văn phòng tốt nhất

🤖 Trợ lý AI của Kutools: Cách mạng hóa việc phân tích dữ liệu dựa trên: Thực thi thông minh   |  Tạo mã  |  Tạo công thức tùy chỉnh  |  Phân tích dữ liệu và tạo biểu đồ  |  Gọi các hàm Kutools...
Các tính năng phổ biến: Tìm, đánh dấu hoặc xác định các bản sao   |  Xóa hàng trống   |  Kết hợp các cột hoặc ô mà không làm mất dữ liệu   |   Vòng không có công thức hữu ích. Cảm ơn !
Siêu tra cứu: Nhiều tiêu chí VLookup    VLookup Nhiều Giá Trị  |   VLookup trên nhiều trang tính   |   Tra cứu mờ ....
Danh sách thả xuống nâng cao: Tạo nhanh danh sách thả xuống   |  Danh sách thả xuống phụ thuộc   |  Danh sách thả xuống nhiều lựa chọn ....
Trình quản lý cột: Thêm một số cột cụ thể  |  Di chuyển cột  |  Chuyển đổi trạng thái hiển thị của các cột ẩn  |  So sánh dãy và cột hữu ích. Cảm ơn !
Các tính năng nổi bật: Tiêu điểm lưới   |  Chế độ xem thiết kế   |   Thanh công thức lớn    Trình quản lý sổ làm việc & trang tính   |  Thư viện tài nguyên (Văn bản tự động)   |  Bảng chọn ngày   |  Kết hợp các bảng tính   |  Mã hóa/Giải mã ô    Gửi email theo danh sách   |  Siêu lọc   |   Bộ lọc đặc biệt (lọc in đậm/nghiêng/gạch ngang...) ...
15 bộ công cụ hàng đầu12 bản văn CÔNG CỤ (thêm văn bản, Xóa ký tự,...)   |   50 + Biểu đồ Các loại (Biểu đồ Gantt,...)   |   40+ Thực tế Công thức (Tính tuổi dựa trên ngày sinh,...)   |   19 chèn CÔNG CỤ (Chèn mã QR, Chèn ảnh từ đường dẫn,...)   |   12 Chuyển đổi CÔNG CỤ (Số thành từ, Chuyển đổi tiền tệ,...)   |   7 Hợp nhất & Tách CÔNG CỤ (Các hàng kết hợp nâng cao, Chia ô,...)   |   ... và nhiều hơn nữa

Nâng cao kỹ năng Excel của bạn với Kutools for Excel và trải nghiệm hiệu quả hơn bao giờ hết. Kutools for Excel cung cấp hơn 300 tính năng nâng cao để tăng năng suất và tiết kiệm thời gian.  Bấm vào đây để có được tính năng bạn cần nhất...

Mô tả


Tab Office mang lại giao diện Tab cho Office và giúp công việc của bạn trở nên dễ dàng hơn nhiều

  • Cho phép chỉnh sửa và đọc theo thẻ trong Word, Excel, PowerPoint, Publisher, Access, Visio và Project.
  • Mở và tạo nhiều tài liệu trong các tab mới của cùng một cửa sổ, thay vì trong các cửa sổ mới.
  • Tăng 50% năng suất của bạn và giảm hàng trăm cú nhấp chuột cho bạn mỗi ngày!
Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Clicking on cancel , sends the message
This comment was minimized by the moderator on the site
Hi, I get an error message when I run this VBA code.The error is "Compile error: Sub or function not defined."
This comment was minimized by the moderator on the site
Hi the code is giving me an error saying "Compile error: Sub or Function not defined."What would be the cause for this?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
The solution worked for me once but I couldn't get it to work for me again. Any suggestions how to do that?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
This worked one time, after tha never worked again.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Hi There,

For some reason, mine, it works well only for one day. The codes don't seem to work anymore the next day, although those codes remained intact,

Anyone has such experience and know why?

Thanks.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Seeing same issue, any desired solution?
This comment was minimized by the moderator on the site
Same issue, it doesn't work for next day or after relaunching outlook, any solution?
This comment was minimized by the moderator on the site
Hi, i've got the same experience. Not sure yet how to solve this, i'm very new to VBA.
Would like to hear from you if you found a fix.
This comment was minimized by the moderator on the site
Hello! Very useful and it works perfectly.

Is it possible to adjust the code so that it only pops up when there is an attachment? Similarly, is it possible to adjust it so it prompts the pop-up only when the message is sent externally (not to people of the company)?
This comment was minimized by the moderator on the site
Hi There

Is it possible to get a message to come up only when an attachment is present, and only when sent externally?

Thank you very much!

Daniel
This comment was minimized by the moderator on the site
If you want the pop-up to only happen when you send to several emails, i.e. >10, how do you do that?

Oh and thanks, it works like a treat.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations